Other

- Add to older versions of the SuperStand to extend height to accept 29er wheels

Replace an old Topeak babyseat or just change color for a new look. - Replacement Pad Set only for Topeak Baby Seat II

Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only

The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds. The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store. The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers: - T1980 Bushido (ANT+) - T2020 i-Genius - T2050 Tacx IRONMAN trainer - T2060 Tacx IRONMAN Smart - T2080 Genius Smart with Upgrade Smart - T2170 i-Vortex - T2180 Vortex Smart with Upgrade Smart - T2240 Flow Smart with Upgrade Smart - T2780 Bushido Smart with Upgrade Smart

The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

The NEO Skyliner provides support for the front wheel while using a trainer, and creates a more level platform for the bike.

The NEO Track replaces the front wheel support of the NEO and enables you to steer freely in the Tacx Trainer software 4, Advanced (Windows PC). The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to decide yourself where to go to when training in virtual worlds. The NEO Track is only suitable for the NEO Smart in combination with the Upgrade Smart (Tacx Trainer software 4, Advanced and ANT+ antenna required). - Communicates wirelessly with the computer via ANT+ - Rubber caps on the bottom prevent sliding and reduce noise - Foldable, lightweight and easy to store

With the disc extractor you can remove the aluminum disc on the side of your NEO Smart trainer in order to check the inside for residue and clean if necessary. This small tool is specially developed to open your NEO trainer yourself while staying within the terms of your warranty. The NEO disc extractor comes with three screws to fasten to your NEO. Use of this tool requires a 4mm Allen wrench, 5mm Allen wrench, and 24mm socket wrench.

Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.

The Tacx trainer mat protects your floor and muffles the noise of your indoor training sessions. - Large and rollable trainer mat - Made from high quality, water-repellent 6mm thick foam - Protects your floor against scratches and sweat - Muffles noise and vibrations - 180 x 85 cm

Give your Galaxia or Anteres the best possible protection for storage or transport by using this sturdy trainer bag. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage. This bag is ideal for riders who take their rollers to the track with them to warm up.

The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.

A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.

This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions. - Highly absorbent - Measures 30cm x 115cm

The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.

Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.

- Separate bracket mounts to ceiling or 2x4 joists - Dual rope system for easier hoisting - Hardware, tie off cleat, and accessory straps for ladders, kayaks, canoes included - 50lb weight capacity

8 sets of SKS Breakaway Mount Eyebolt and Nut Set

Keep your pants clean with SKS's Chainboard chain guard. This handy device bolts onto the chainstay and bottom bracket, and utilizes a telescoping design to fit a wide variety of frames.

Replacement SKS Rubber Straps for RacebladePro and S-Board

Set of 8 SKS stainless fender drawbolt/nuts

Front and Rear SKS V-Brace Fender Stay Set with Drawbolts

Not a fair weather rider? Neither are we. Protect your ride from mud with the new Race Face team seat covers. Built as a quick fix barrier between rider and seat, the 96% nylon, 4% spandex fiber content means this cover is built for abuse. A waterproof membrane and DWR finish ensure your seat stays dry.

ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.

Converts quill style forks to use threadless stems.

This multifunctional storage bottle with wide filler-cap fits in standard bottle cages and allows you to conveniently carry tools or other ride accessories.

Park's Adjustable Shop Stool is ideal for quickly maneuvering into the best position when working on your bikes. It's adjustable from 17 to 22 inches high and features 5 smooth-rolling wheels for easy scooting. You'll also love the comfy padded seat with Park's colorful logo.

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

Show your love for bicycles, tools and all things Park Tool with their Coffee Mug. Perfect for impressing your guests with a cool-logo cup, or fueling yourself before a fun wrenching session, a few of these mugs should be in every kitchen cabinet and bicycle workshop, too!